![]() Externally and internally illuminated fire exit signs shall be visible both the normal and emergency lighting mode. Fire exit signs larger than the minimum established in this paragraph shall have letter widths, strokes, and spacing in proportion to their height.Įvery fire exit sign shall be suitably illuminated by a reliable light source. (5cm) accept the letter "I", and the minimum spacing between letters shall be not less than 3/8 in. ![]() The word EXIT shall have letters of a width not less than 2 in. (15.2 cm) high with the principal strokes of letters not less than 3/4 in. The size of a Every fire exit sign must have the word EXIT or other appropriate wording in plainly legible letters not less than 6 in. For exit doors, the fire exit sign shall be mounted on the door or adjacent to the door with the closest edge of the sign within 4 in. The bottom of the fire exit sign shall be not less than 6 in. Fire Exit signs shall be placed near the floor level in addition to those signs required for doors or corridors. Signs placement shall be such that no point in the exit access is more than 100 ft (30m) from the nearest visible sign. Access to exits shall be marked by approved readily visible signs in all cases where the exit or way to reach it is not readily apparent to the occupants. ![]() Fire exits shall be marked by approved sign readily visible from any direction of Fire exit access.Įxception - Main exterior exit doors that obviously and clearly are identifiable exits. Means of egress shall be marked in accordance with this section where required. NFPA 101 Life Safety Code and Marking of Means of Egress - Knowing where the emergency exits are in buildings you frequent can save your life. Make sure to pay attention to the Fire Exit Sign codes for your local area. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |